广州洲聚网站开发网推是什么

环境

• docker desktop for windows 4.23.0
• redis 7.2

一、前提准备

1. redis配置文件

因为Redis 7.2 docker镜像里面没有配置文件，所以需要去redis官网下载一个复制里面的redis.conf
博主这里用的是7.2.3版本的redis.conf，这个文件就在解压后第一层文件夹里。

2. 下载redis镜像

docker pull redis:7.2

3. 文件夹结构

如下建立cluster文件夹，并复制出三份conf文件到如图位置。

二、docker-compose

docker-compose文件具体内容如下。

version: '3.8'networks:redis-network:driver: bridgeipam:driver: defaultconfig:- subnet: 172.30.1.0/24services:redis-master:container_name: redis-masterimage: redis:7.2volumes:- ./master/redis.conf:/usr/local/etc/redis/redis.conf
#      - ./master/data:/dataports:- "7001:6379"command: ["redis-server", "/usr/local/etc/redis/redis.conf"]networks:redis-network:ipv4_address: 172.30.1.2redis-replica1:container_name: redis-replica1image: redis:7.2volumes:- ./replica1/redis.conf:/usr/local/etc/redis/redis.conf
#      - ./replica1/data:/dataports:- "7002:6379"command: ["redis-server", "/usr/local/etc/redis/redis.conf"]depends_on:- redis-masternetworks:redis-network:ipv4_address: 172.30.1.3redis-replica2:container_name: redis-replica2image: redis:7.2volumes:- ./replica2/redis.conf:/usr/local/etc/redis/redis.conf
#      - ./replica2/data:/dataports:- "7003:6379"command: ["redis-server", "/usr/local/etc/redis/redis.conf"]depends_on:- redis-masternetworks:redis-network:ipv4_address: 172.30.1.4

需要注意以下几点

1. 这里自定义了bridge子网并限定了范围，如果该范围已经被使用，请更换。
2. 这里没有对data进行-v挂载，如果要挂载，请注意宿主机对应文件夹权限问题。

三、主从配置

1.主节点配置文件

主节点对应的配置文件是master/redis.conf，需要做以下修改

1. bind
   将bind 127.0.0.1 -::1修改为bind 0.0.0.0，监听来自任意网络接口的连接。

2. protected-mode
   将protected-mode设置为no，关闭保护模式，接收远程连接。

3. masterauth
   将masterauth设置为1009，这是从节点连接到主节点的认证密码，你可以指定为其他的。

4. requirepass
   将requirepass设置为1009，这是客户端连接到本节点的认证密码，你可以指定为其他的。

2.从节点配置文件

把上面主节点的配置文件复制粘贴，然后继续做以下更改，就可以作为从节点配置文件了

1. replicaof
   旧版本添加一行replicaof redis-master 6379，表示本节点为从节点，并且主节点ip为redis-master，端口为6379。这里你也可以把ip填成172.30.1.2，因为在docker-compose中我们为各节点分配了固定的ip，以及端口是6379而不是映射的700x，这些都是docker的知识，这里不再赘述。

redis在5.0引入了replica的概念来替换slave，所以后续的新版本推荐使用replicaof，即便slaveof目前仍然支持。

四、运行

配置好三个节点的配置文件后，用以下命令运行整个服务

docker-compose -p redis-cluster up -d

查看主节点日志，可以看到主节点向172.30.1.3和172.30.1.4两个从节点同步数据，并且连接正常，以及一系列success。

2024-01-05 15:12:59 1:M 05 Jan 2024 07:12:59.008 * Opening AOF incr file appendonly.aof.1.incr.aof on server start
2024-01-05 15:12:59 1:M 05 Jan 2024 07:12:59.008 * Ready to accept connections tcp
2024-01-05 15:13:00 1:M 05 Jan 2024 07:13:00.996 * Replica 172.30.1.4:6379 asks for synchronization
2024-01-05 15:13:00 1:M 05 Jan 2024 07:13:00.996 * Full resync requested by replica 172.30.1.4:6379
2024-01-05 15:13:00 1:M 05 Jan 2024 07:13:00.996 * Replication backlog created, my new replication IDs are '5bef8fa8e58042f1aee8eae528c6e10228a0c96b' and '0000000000000000000000000000000000000000'
2024-01-05 15:13:00 1:M 05 Jan 2024 07:13:00.996 * Delay next BGSAVE for diskless SYNC
2024-01-05 15:13:01 1:M 05 Jan 2024 07:13:01.167 * Replica 172.30.1.3:6379 asks for synchronization
2024-01-05 15:13:01 1:M 05 Jan 2024 07:13:01.167 * Full resync requested by replica 172.30.1.3:6379
2024-01-05 15:13:01 1:M 05 Jan 2024 07:13:01.167 * Delay next BGSAVE for diskless SYNC
2024-01-05 15:13:05 1:M 05 Jan 2024 07:13:05.033 * Starting BGSAVE for SYNC with target: replicas sockets
2024-01-05 15:13:05 1:M 05 Jan 2024 07:13:05.033 * Background RDB transfer started by pid 20
2024-01-05 15:13:05 20:C 05 Jan 2024 07:13:05.035 * Fork CoW for RDB: current 0 MB, peak 0 MB, average 0 MB
2024-01-05 15:13:05 1:M 05 Jan 2024 07:13:05.035 * Diskless rdb transfer, done reading from pipe, 2 replicas still up.
2024-01-05 15:13:05 1:M 05 Jan 2024 07:13:05.052 * Background RDB transfer terminated with success
2024-01-05 15:13:05 1:M 05 Jan 2024 07:13:05.052 * Streamed RDB transfer with replica 172.30.1.4:6379 succeeded (socket). Waiting for REPLCONF ACK from replica to enable streaming
2024-01-05 15:13:05 1:M 05 Jan 2024 07:13:05.052 * Synchronization with replica 172.30.1.4:6379 succeeded
2024-01-05 15:13:05 1:M 05 Jan 2024 07:13:05.052 * Streamed RDB transfer with replica 172.30.1.3:6379 succeeded (socket). Waiting for REPLCONF ACK from replica to enable streaming
2024-01-05 15:13:05 1:M 05 Jan 2024 07:13:05.052 * Synchronization with replica 172.30.1.3:6379 succeeded

接着看看从节点日志，可以看到Connecting to MASTER redis-master:6379，向主节点连接并申请同步数据，以及一系列success。

2024-01-05 15:13:01 1:S 05 Jan 2024 07:13:01.166 * Connecting to MASTER redis-master:6379
2024-01-05 15:13:01 1:S 05 Jan 2024 07:13:01.166 * MASTER <-> REPLICA sync started
2024-01-05 15:13:01 1:S 05 Jan 2024 07:13:01.166 * Non blocking connect for SYNC fired the event.
2024-01-05 15:13:01 1:S 05 Jan 2024 07:13:01.167 * Master replied to PING, replication can continue...
2024-01-05 15:13:01 1:S 05 Jan 2024 07:13:01.167 * Partial resynchronization not possible (no cached master)
2024-01-05 15:13:05 1:S 05 Jan 2024 07:13:05.033 * Full resync from master: 5bef8fa8e58042f1aee8eae528c6e10228a0c96b:0
2024-01-05 15:13:05 1:S 05 Jan 2024 07:13:05.035 * MASTER <-> REPLICA sync: receiving streamed RDB from master with EOF to disk
2024-01-05 15:13:05 1:S 05 Jan 2024 07:13:05.038 * MASTER <-> REPLICA sync: Flushing old data
2024-01-05 15:13:05 1:S 05 Jan 2024 07:13:05.038 * MASTER <-> REPLICA sync: Loading DB in memory
2024-01-05 15:13:05 1:S 05 Jan 2024 07:13:05.056 * Loading RDB produced by version 7.2.3
2024-01-05 15:13:05 1:S 05 Jan 2024 07:13:05.056 * RDB age 0 seconds
2024-01-05 15:13:05 1:S 05 Jan 2024 07:13:05.056 * RDB memory usage when created 0.90 Mb
2024-01-05 15:13:05 1:S 05 Jan 2024 07:13:05.056 * Done loading RDB, keys loaded: 1, keys expired: 0.
2024-01-05 15:13:05 1:S 05 Jan 2024 07:13:05.057 * MASTER <-> REPLICA sync: Finished with success
2024-01-05 15:13:05 1:S 05 Jan 2024 07:13:05.057 * Creating AOF incr file temp-appendonly.aof.incr on background rewrite
2024-01-05 15:13:05 1:S 05 Jan 2024 07:13:05.057 * Background append only file rewriting started by pid 21
2024-01-05 15:13:05 21:C 05 Jan 2024 07:13:05.067 * Successfully created the temporary AOF base file temp-rewriteaof-bg-21.aof
2024-01-05 15:13:05 21:C 05 Jan 2024 07:13:05.068 * Fork CoW for AOF rewrite: current 0 MB, peak 0 MB, average 0 MB
2024-01-05 15:13:05 1:S 05 Jan 2024 07:13:05.084 * Background AOF rewrite terminated with success
2024-01-05 15:13:05 1:S 05 Jan 2024 07:13:05.084 * Successfully renamed the temporary AOF base file temp-rewriteaof-bg-21.aof into appendonly.aof.5.base.rdb
2024-01-05 15:13:05 1:S 05 Jan 2024 07:13:05.084 * Successfully renamed the temporary AOF incr file temp-appendonly.aof.incr into appendonly.aof.5.incr.aof
2024-01-05 15:13:05 1:S 05 Jan 2024 07:13:05.093 * Removing the history file appendonly.aof.4.incr.aof in the background
2024-01-05 15:13:05 1:S 05 Jan 2024 07:13:05.093 * Removing the history file appendonly.aof.4.base.rdb in the background
2024-01-05 15:13:05 1:S 05 Jan 2024 07:13:05.101 * Background AOF rewrite finished successfully

五、测试

用你喜欢的docker容器连接工具或者redis连接工具来连接主节点redis服务，只要能进入redis-cli就行。这里以docker容器连接为例。

1. 主节点设置一个字段并查看从节点信息

root@ac1ecfc4e3a5:/data# redis-cli 
127.0.0.1:6379> auth 1009
OK
127.0.0.1:6379> set num 67899
OK
127.0.0.1:6379> get num
"67899"
127.0.0.1:6379> INFO replication
# Replication
role:master
connected_slaves:2
slave0:ip=172.30.1.4,port=6379,state=online,offset=3388,lag=1
slave1:ip=172.30.1.3,port=6379,state=online,offset=3388,lag=1
master_failover_state:no-failover
master_replid:5bef8fa8e58042f1aee8eae528c6e10228a0c96b
master_replid2:0000000000000000000000000000000000000000
master_repl_offset:3388
second_repl_offset:-1
repl_backlog_active:1
repl_backlog_size:1048576
repl_backlog_first_byte_offset:1
repl_backlog_histlen:3388

2. 从节点获取

root@a3016db388e3:/data# redis-cli 
127.0.0.1:6379> auth 1009
OK
127.0.0.1:6379> get num
"67899"

测试成功。