当前位置： 首页 > news >正文

购物网站，购物车界面如何做做企业推广

news 2025/7/27 13:31:37
购物网站，购物车界面如何做,做企业推广,汉中市建设工程信息申报系统,网络服务商怎么找一、实验题目 基于Cobbler实现多版本操作系统的批量部署。 二、实验目的 掌握Cobbler服务器的安装与配置方法。 学会使用Cobbler进行多版本操作系统的批量部署。 理解PXE网络启动原理及其在操作系统部署中的应用。 提高在实际生产环境中快速部署和管理操作系统的能力。 …

一、实验题目

基于Cobbler实现多版本操作系统的批量部署。

二、实验目的

  1. 掌握Cobbler服务器的安装与配置方法。

  2. 学会使用Cobbler进行多版本操作系统的批量部署。

  3. 理解PXE网络启动原理及其在操作系统部署中的应用。

  4. 提高在实际生产环境中快速部署和管理操作系统的能力。

三、实验环境

  1. 硬件环境:

    • 一台安装有Linux系统（如CentOS或Ubuntu）的服务器，作为Cobbler服务器。

    • 若干台客户端计算机，通过网络与Cobbler服务器连接。

  2. 软件环境:

    • Cobbler 2.x版本

    • DHCP服务器（通常集成在Cobbler中）

    • TFTP服务器（通常集成在Cobbler中）

    • Apache或其他Web服务器

    • 操作系统安装镜像文件（如CentOS、Ubuntu等）

四、实验内容

  1. 安装和配置Cobbler服务器。

  2. 配置DHCP和TFTP服务。

  3. 导入多版本操作系统的安装镜像。

  4. 创建和配置Cobbler profiles和systems。

  5. 通过PXE启动批量部署操作系统。

  6. 验证部署结果，确保客户端计算机成功安装指定的操作系统。

五、实验步骤

前提条件：

1、能够访问互联网

[root@localhost ~]# ping -c1 www.baidu.com

2、firewalld selinux 关闭

[root@localhost ~]# sed -i '/^SELINUX=/ c SELINUX=disabled' /etc/selinux/config  [root@localhost ~]# setenforce 0如果不关闭selinux也可以  #getsebool -a|grep cobbler  #setsebool -P cobbler_can_network_connect 1 
​[root@cobbler-server ~]# systemctl disable --now firewalld
​[root@localhost ~]# systemctl is-enabled firewalld.servicedisabled
​或者firewall-cmd --permanent --add-port=67/udpfirewall-cmd --permanent --add-port=68/udpfirewall-cmd --permanent --add-port=80/tcpfirewall-cmd --permanent --add-port=443/tcpfirewall-cmd --reloadfirewall-cmd --permanent --list-ports

3、配置epel源

[root@localhost ~]# yum install epel-release -y

安装cobbler

1、安装dhcp httpd xinetd

[root@localhost ~]# yum install -y httpd dhcp xinetd tftp-server

2、安装cobbler

[root@localhost ~]# yum install -y cobbler cobbler-web

3、将cobbler httpd dhcp xinetd添加到开机自启

[root@localhost ~]# systemctl enable httpd dhcpd xinetd cobblerd

配置环境

cp /etc/cobbler/settings{,.bak}

环境检测：

[root@localhost ~]# systemctl start httpd cobblerd[root@localhost ~]# cobbler checkThe following are potential configuration items that you may want to fix:
​1 : The 'server' field in /etc/cobbler/settings must be set to something other than localhost, or kickstarting features will not work.  This should be a resolvable hostname or IP for the boot server as reachable by all machines that will use it.2 : For PXE to be functional, the 'next_server' field in /etc/cobbler/settings must be set to something other than 127.0.0.1, and should match the IP of the boot server on the PXE network.3 : SELinux is enabled. Please review the following wiki page for details on ensuring cobbler works correctly in your SELinux environment:https://github.com/cobbler/cobbler/wiki/Selinux4 : change 'disable' to 'no' in /etc/xinetd.d/tftp5 : some network boot-loaders are missing from /var/lib/cobbler/loaders, you may run 'cobbler get-loaders' to download them, or, if you only want to handle x86/x86_64 netbooting, you may ensure that you have installed a *recent* version of the syslinux package installed and can ignore this message entirely.  Files in this directory, should you want to support all architectures, should include pxelinux.0, menu.c32, elilo.efi, and yaboot. The 'cobbler get-loaders' command is the easiest way to resolve these requirements.6 : enable and start rsyncd.service with systemctl7 : debmirror package is not installed, it will be required to manage debian deployments and repositories8 : ksvalidator was not found, install pykickstart9 : The default password used by the sample templates for newly installed machines (default_password_crypted in /etc/cobbler/settings) is still set to 'cobbler' and should be changed, try: "openssl passwd -1 -salt 'random-phrase-here' 'your-password-here'" to generate new one10 : fencing tools were not found, and are required to use the (optional) power management features. install cman or fence-agents to use them
​Restart cobblerd and then run 'cobbler sync' to apply changes.逐个解决以上问题
​
1、配置文件设置server（cobbler服务器地址）[root@localhost ~]# sed -i 's#server: 127.0.0.1#server: 172.16.110.91#g' /etc/cobbler/settings
​
2、设置'next_server'（DHCP服务器地址）[root@localhost ~]# sed -i 's#next_server: 127.0.0.1#next_server: 172.16.110.91#g' /etc/cobbler/settings3、关闭selinux[root@localhost ~]# sed -i 's#SELINUX=enforcing#SELINUX=disabled#g' /etc/selinux/config#系统重启后生效
​
4、开启tftp修改/etc/xinetd.d/tftp，disable ‘yes’ 改为 ‘no’5、准备引导操作系统文件#如果没有互联网，引导文件通过安装syslinux包获取。安装syslinux程序包，而后复制/usr/share/syslinux/{pxelinux.0,memu.c32}等文件至/var/lib/cobbler/loaders/目录中[root@localhost ~]# cp /usr/share/syslinux/{pxelinux.0,memu.c32} /var/lib/cobbler/loaders/或者用提供的压缩包解压到指定文件夹[root@localhost ~]# tar xf loaders.tar.gz -C /var/lib/cobbler/loaders/
​
6、启动并开机自启动rsyncd.service[root@localhost ~]# systemctl start rsyncd.service[root@localhost ~]# systemctl enable rsyncd.service 7、如果不安装debian系统可以不配置
​
8、安装pykickstart[root@localhost ~]# yum install pykickstart -y
​
9、生成cobbler安装系统root初始化密码#这里生成密钥和配置默认密钥，ks文件引用(前面是干扰字符,后面的是密码)[root@localhost ~]# openssl passwd -1 -salt 'random-phrase-here' 'redhat'$1$random-p$MvGDzDfse5HkTwXB2OLNb.#更复杂安全密码[root@localhost ~]# openssl passwd -1 -salt $(openssl rand -hex 8) 'redaht'$1$4990cb90$jnQShir2NWVl23tbwpnFO0#加入到cobbler配置[root@localhost ~]# sed -i '/default_password_crypted:/cdefault_password_crypted: "$1$random-p$MvGDzDfse5HkTwXB2OLNb."' /etc/cobbler/settings 
​
10、安装cman or fence-agents[root@localhost ~]# yum install cman fence-agents -y
​
配置DHCP：#启用cobbler管理DHCP功能[root@localhost ~]# sed -i 's#manage_dhcp: 0#manage_dhcp: 1#g' /etc/cobbler/settings#manage_dhcp: 0 #设置为1时，开启cobbler的dhcp管理器修改DHCP配置文件[root@localhost ~]# vim /etc/cobbler/dhcp.template ...subnet 172.16.110.0 netmask 255.255.255.0 {option routers             172.16.110.254;option domain-name-servers 114.114.114.114;option subnet-mask         255.255.255.0;range dynamic-bootp        172.16.110.50 172.16.110.80;;default-lease-time         21600;max-lease-time             43200;...
​
配置pxe[root@localhost ~]# sed -i 's/pxe_just_once: 0/pxe_just_once: 1/' /etc/cobbler/settings

重启机器，再次测试：

[root@localhost ~]# cobbler check

同步cobbler配置

[root@localhost ~]# cobbler synctask started: 2016-12-02_045946_synctask started (id=Sync, time=Fri Dec  2 04:59:46 2016)running pre-sync triggerscleaning treesremoving: /var/lib/tftpboot/grub/imagescopying bootloaderstrying hardlink /var/lib/cobbler/loaders/pxelinux.0 -> /var/lib/tftpboot/pxelinux.0trying hardlink /var/lib/cobbler/loaders/menu.c32 -> /var/lib/tftpboot/menu.c32trying hardlink /var/lib/cobbler/loaders/yaboot -> /var/lib/tftpboot/yaboottrying hardlink /usr/share/syslinux/memdisk -> /var/lib/tftpboot/memdisktrying hardlink /var/lib/cobbler/loaders/grub-x86.efi -> /var/lib/tftpboot/grub/grub-x86.efitrying hardlink /var/lib/cobbler/loaders/grub-x86_64.efi -> /var/lib/tftpboot/grub/grub-x86_64.eficopying distros to tftpbootcopying imagesgenerating PXE configuration filesgenerating PXE menu structurerendering DHCP filesgenerating /etc/dhcp/dhcpd.confrendering TFTPD filesgenerating /etc/xinetd.d/tftpcleaning link cachesrunning post-sync triggersrunning python triggers from /var/lib/cobbler/triggers/sync/post/*running python trigger cobbler.modules.sync_post_restart_servicesrunning: dhcpd -t -qreceived on stdout: received on stderr: running: service dhcpd restartreceived on stdout: received on stderr: Redirecting to /bin/systemctl restart  dhcpd.servicerunning shell triggers from /var/lib/cobbler/triggers/sync/post/*running python triggers from /var/lib/cobbler/triggers/change/*running python trigger cobbler.modules.scm_trackrunning shell triggers from /var/lib/cobbler/triggers/change/**** TASK COMPLETE ***

WEB访问 https://IP/cobbler_web 账号密码：cobbler/cobbler

cobbler批量部署CentOS 7和8

1、创建用于上传iso文件目录
[root@localhost ~]# mkdir /software/iso -p
然后上传centos6 和 centos7 的dvd iso镜像，过程略。
上传好后如下：
[root@localhost iso]# ll
total 13648896
-rw-r--r-- 1 root root 4712300544 May 28 16:45 CentOS-7-x86_64-DVD-2009.iso
-rw-r--r-- 1 root root 7554990080 May 28 16:46 CentOS-8.1.1911-x86_64-dvd1.iso
​
2、创建镜像导入存放目录
# mkdir -p /data/os/Linux/CentOS/X86_64/CentOS{7..8}/dvd
​
3、挂载 ISO 镜像并导入dvd 数据
[root@localhost iso]# mount /software/iso/CentOS-7-x86_64-DVD-2009.iso /data/os/Linux/CentOS/X86_64/CentOS7/dvd/
[root@localhost iso]# mount /software/iso/CentOS-8.1.1911-x86_64-dvd1.iso /data/os/Linux/CentOS/X86_64/CentOS8/dvd/
​
导入时间较久，耐心等待
cobbler import --path=/data/os/Linux/CentOS/X86_64/CentOS7/dvd/ --name=CentOS7.9 --arch=x86_64
cobbler import --path=/data/os/Linux/CentOS/X86_64/CentOS8/dvd/ --name=CentOS8.1 --arch=x86_64
​
4、列出导入后的配置
[root@localhost iso]# cobbler list
distros:CentOS7.9-x86_64CentOS8.1-x86_64
​
profiles:CentOS7.9-x86_64CentOS8.1-x86_64
​
systems:
​
repos:
​
images:
​
mgmtclasses:
​
packages:
​
files:
​
​
卸载
[root@localhost ~]# umount /data/os/Linux/CentOS/X86_64/CentOS7/dvd/
[root@localhost ~]# umount /data/os/Linux/CentOS/X86_64/CentOS8/dvd/
​
同步cobbler配置
[root@localhost ~]# cobbler sync

参考文件

# Cobbler for Kickstart Configurator for CentOS 7 by yao zhang
install
url --url=$tree
text
lang en_US.UTF-8
keyboard us
zerombr
bootloader --location=mbr --driveorder=sda --append="crashkernel=auto rhgb quiet"
#Network information
$SNIPPET('network_config')
#network --bootproto=dhcp --device=eth0 --onboot=yes --noipv6 --hostname=CentOS7
timezone --utc Asia/Shanghai
authconfig --enableshadow --passalgo=sha512
rootpw  --iscrypted $default_password_crypted
clearpart --all --initlabel
part /boot --fstype xfs --size 1024
part swap --size 1024
part / --fstype xfs --size 1 --grow
firstboot --disable
selinux --disabled
firewall --disabled
logging --level=info
reboot
​
%pre
$SNIPPET('log_ks_pre')
$SNIPPET('kickstart_start')
$SNIPPET('pre_install_network_config')
# Enable installation monitoring
$SNIPPET('pre_anamon')
%end
​
%packages
@^minimal
@compat-libraries
@core
@debugging
@development
bash-completion
chrony
dos2unix
kexec-tools
lrzsz
nmap
sysstat
telnet
tree
vim
wget
%end
​
%post
systemctl disable postfix.service
%end
#version=RHEL8
install
ignoredisk --only-use=sda
# Partition clearing information
clearpart --all --initlabel
# Use graphical install
text
# Use CDROM installation media
url --url=$treereboot
# Keyboard layouts
keyboard --vckeymap=cn --xlayouts='cn'
# System language
lang en_US.UTF-8selinux --disabled
firewall --disabled
# Network information
network  --bootproto=dhcp --device=ens160 --ipv6=auto --activate
network  --hostname=wenzi.localhost
# Root password
rootpw --iscrypted $default_password_crypted
# Run the Setup Agent on first boot
firstboot --enable
# Do not configure the X Window System
skipx
# System services
services --disabled="chronyd"
# System timezone
timezone Asia/Shanghai --isUtc --nontp
# Disk partitioning information
zerombrpart /boot --fstype="ext4" --ondisk=sda --size=1024
part /swap --fstype="swap" --ondisk=sda --size=2048
part / --fstype="xfs" --ondisk=sda --grow --size=1%packages
@^minimal-environment
kexec-tools
%end
%addon com_redhat_kdump --enable --reserve-mb='auto'
%end
%post
%end 
%anaconda
pwpolicy root --minlen=6 --minquality=1 --notstrict --nochanges --notempty
pwpolicy user --minlen=6 --minquality=1 --notstrict --nochanges --emptyok
pwpolicy luks --minlen=6 --minquality=1 --notstrict --nochanges --notempty
%end

六、心得体会

通过本次实验，我掌握了Cobbler服务器的安装和配置方法，并成功实现了多版本操作系统的批量部署。理解了PXE网络启动的原理和实践操作。Cobbler大大简化了操作系统的部署过程，提高了效率。在实际工作中，Cobbler可以用于快速部署和管理大规模服务器环境，为系统管理员提供了极大的便利。

http://www.zhongyajixie.com/news/56843.html

相关文章：

  • 广东东莞职业技术学院百度seo优化排名如何
  • 网站建设方法电商项目策划书
  • 响应式网站区别长沙优化排名
  • 网站备案填写免费seo公司
  • 网站开发模最新百度快速排名技术
  • 网站打不开什么原因近期国际热点大事件
  • 商城网站建设模板下载长春seo网站排名
  • 网站建设制作设计营销公司杭州站长工具浪潮
  • 哪个网站可以做创意短视频建个网站费用多少
  • 自己做网站别人怎么看见搜索关键词排名推广
  • 永年企业做网站推广营销网站设计
  • 请人做网站我要提供什么需求汕头seo计费管理
  • 做网站包含什么职位保健品的营销及推广方案
  • 相应式手机网站建设培训网站制作
  • 监理网站产品关键词
  • 外贸网站建设电话高清视频网络服务器
  • 有做机械工装的网站吗重庆seo主管
  • 网站设计教学seo薪酬水平
  • 西安做网站首选销售人员培训课程有哪些
  • 江苏省网站备案电话营销策划方案1000例
  • 三站合一的网站怎么做上海关键词优化报价
  • 成都网站建设与开发全国互联网营销大赛官网
  • 网站伪静态如何配置文件seo优化网站的注意事项
  • 用html怎么做网站尾部武威网站seo
  • 江门网站快速排名优化网站改版公司哪家好
  • 淄博网站的优化seo模板建站
  • 网站行业不死鸟分享友情链接
  • 53网站客服系统哪个好网络营销推广方案模板
  • 上海行业网站建设超级优化大师
  • 2015年做哪些网站能致富最近最新新闻