自己做手机网站谷歌广告代理商
文章目录
- 一、样例代码
- 二、预备
- 三、常见使用
- 1、cgdb调试操作
- 2、gdb调试操作
- 四、常见技巧
- 1、 **安装cgdb:**
- 2、watch
- 3、set var确定问题原因
- 4、条件断点
一、样例代码
// mycmd.c
#include <stdio.h>int Sum(int s, int e)
{int result = 0;for(int i = s; i <= e; i++){result += i;} return result;
}
int main()
{int start = 1;int end = 100;printf("I will begin\n");int n = Sum(start, end);printf("running done, result is: [%d-%d]=%d\n", start, end, n);return 0;
}
二、预备
• 程序的发布方式有两种， debug 模式和 release 模式， Linux gcc/g++ 出来的二进制程序，默认是 release 模式。
• 要使用gdb调试，必须在源代码生成二进制程序的时候, 加上 -g 选项，如果没有添加，程序无法被编译
$ gcc mycmd.c -o mycmd # 默认模式，不支持调试
$ file mycmd
mycmd: ELF 64-bit LSB shared object, x86-64, version 1 (SYSV), dynamically
linked, interpreter /lib64/ld-linux-x86-64.so.2,
BuildID[sha1]=82f5cbaada10a9987d9f325384861a88d278b160, for GNU/Linux
3.2.0, not stripped$ gcc mycmd.c -o mycmd -g # debug模式
$ file mycmd
mycmd: ELF 64-bit LSB shared object, x86-64, version 1 (SYSV), dynamically
linked, interpreter /lib64/ld-linux-x86-64.so.2,
BuildID[sha1]=3d5a2317809ef86c7827e9199cfefa622e3c187f, for GNU/Linux
3.2.0, with debug_info, not stripped
三、常见使用
- 开始：
gdb binFile - 退出：
ctrl + d或quit调试命令
1、cgdb调试操作
按下ESC键进入代码窗口，此时可以上下浏览代码，并且可以进行一系列的操作：
| 按键 | 操作 |
|---|---|
| 空格键 | 设置或者取消断点; |
| o | 查看代码所在的文件; |
| / 或者 ? | 在代码中搜索字符串; |
| - | 缩小代码窗口; |
| + | 扩大代码窗口; |
| gg | 光标移动到文件头部; |
| GG | 光标移动到文件尾部; |
| ctrl + b | 代码向上翻一页; |
| ctrl + u | 代码向上翻半页; |
| ctrl + f | 代码向下翻一页; |
| ctrl + d | 代码向下翻半页; |
按下i键回到调试窗口，进入调试模式，使用的调试指令与GDB几乎一样！
2、gdb调试操作
| 命令 | 作用 | 样例 |
|---|---|---|
| list/l | 显⽰源代码，从上次位置开始，每次列出 | list/l 10 |
| list/l 函数名 | 列出指定函数的源代码 | list/l main |
| list/l ⽂件名:行号 | 列出指定⽂件的源代码 | list/l mycmd.c:1 |
| r/run | 从程序开始连续执⾏ | run |
| n/next | 单步执行，不进⼊函数内部 | next |
| s/step | 单步执行，进⼊函数内部 | step |
| break/b [⽂件名:]行号 | 在指定⾏号设置断点 | break 10 break test.c:10 |
| break/b 函数名 | 在函数开头设置断点 | break main |
| info break/b | 查看当前所有断点的信息 | info break |
| finish | 执⾏到当前函数返回，然后停⽌ | finish |
| print/p 表达式 | 打印表达式的值 | print start+end |
| p 变量 | 打印指定变量的值 | p x |
| set var 变量=值 | 修改变量的值 | set var i=10 |
| continue/c | 从当前位置开始连续执⾏程序 | continue |
| delete/d breakpoints | 删除所有断点 | delete breakpoints |
| delete/d breakpoints n | 删除序号为n的断点 | delete breakpoints 1 |
| disable breakpoints | 禁⽤所有断点 | disable breakpoints |
| enable breakpoints | 启⽤所有断点 | enable breakpoints |
| info/i breakpoints | 查看当前设置的断点列表 | info breakpoints |
| display 变量名 | 跟踪显⽰指定变量的值（每次停止时） | display x |
| undisplay 编号 | 取消对指定编号的变量的跟踪显示 | undisplay 1 |
| until X⾏号 | 执⾏到指定⾏号 | until 20 |
| backtrace/bt | 查看当前执⾏栈的各级函数调⽤及参数 | backtrace |
| info/i locals | 查看当前栈帧的局部变量值 | info locals |
| quit | 退出GDB调试器 | quit |
- -断点(breakpoints) -行号(n)
四、常见技巧
📌
1、 安装cgdb:
• 上面的基本调试还是麻烦，虽然是黑屏，但是还是想看到代码调试
推荐安装cgdb:
• Ubuntu: sudo apt-get install -y cgdb
• Centos: sudo yum install -y cgdb
2、watch
执行时监视一个表达式（如变量）的值。如果监视的表达式在程序运行期间的值发生变化，GDB 会暂
停程序的执行，并通知使用者
(gdb) l main
11
12 return result;
13 }
14
15 int main()
16 {
17 int start = 1;
18 int end = 100;
19 printf("I will begin\n");
20 int n = Sum(start, end);
(gdb) b 20
Breakpoint 1 at 0x11c3: file mycmd.c, line 20.
(gdb) info b
Num Type Disp Enb Address What
1 breakpoint keep y 0x00000000000011c3 in main at mycmd.c:20
(gdb) r
Starting program: /home/whb/test/test/mycmd
I will beginBreakpoint 1, main () at mycmd.c:20
20 int n = Sum(start, end);
(gdb) s
Sum (s=32767, e=-7136) at mycmd.c:5
5 {
(gdb) n
6 int result = 0;
(gdb) watch result
Hardware watchpoint 2: result
(gdb) c
Continuing.Hardware watchpoint 2: resultOld value = -6896
New value = 0
Sum (s=1, e=100) at mycmd.c:7
7 for(int i = s; i <= e; i++)
(gdb) c
Continuing.Hardware watchpoint 2: resultOld value = 0
New value = 1
Sum (s=1, e=100) at mycmd.c:7
7 for(int i = s; i <= e; i++)
(gdb) c
Continuing.Hardware watchpoint 2: resultOld value = 1
New value = 3
Sum (s=1, e=100) at mycmd.c:7
7 for(int i = s; i <= e; i++)
(gdb) c
Continuing.Hardware watchpoint 2: resultOld value = 3
New value = 6
Sum (s=1, e=100) at mycmd.c:7
7 for(int i = s; i <= e; i++)
(gdb) info b
Num Type Disp Enb Address What
1 breakpoint keep y 0x00005555555551c3 in main at mycmd.c:20breakpoint already hit 1 time
2 hw watchpoint keep y resultbreakpoint already hit 4 times
(gdb) d 2
(gdb) info b
Num Type Disp Enb Address What
1 breakpoint keep y 0x00005555555551c3 in main at mycmd.c:20breakpoint already hit 1 time
(gdb) finish
Run till exit from #0 Sum (s=1, e=100) at mycmd.c:7
0x00005555555551d2 in main () at mycmd.c:20
20 int n = Sum(start, end);
Value returned is $1 = 5050
📌 注意：
- 如果你有一些变量不应该修改，但是你怀疑它修改导致了问题，你可以watch它，如果变
化了，就会通知你.
3、set var确定问题原因
更改一下标志位，假设我们想得到 +-result
// mycmd.c
#include <stdio.h>int flag = 0; // 故意错误
//int flag = -1;
//int flag = 1;int Sum(int s, int e)
{int result = 0;for(int i = s; i <= e; i++){result += i;}return result*flag;
} int main()
{int start = 1;int end = 100;printf("I will begin\n");int n = Sum(start, end);printf("running done, result is: [%d-%d]=%d\n", start, end, n);return 0;
}
(gdb) l main
15
16 return result*flag;
17 }
18
19 int main()
20 {
21 int start = 1;
22 int end = 100;
23 printf("I will begin\n");
24 int n = Sum(start, end);
(gdb) b 24
Breakpoint 1 at 0x11ca: file mycmd.c, line 24.
(gdb) r
Starting program: /home/whb/test/test/mycmd
I will beginBreakpoint 1, main () at mycmd.c:24
24 int n = Sum(start, end);
(gdb) n
25 printf("running done, result is: [%d-%d]=%d\n", start, end,
n);
(gdb) n
running done, result is: [1-100]=0 # 这⾥结果为什么是0？
26 return 0;
(gdb) r
The program being debugged has been started already.
Start it from the beginning? (y or n) y
Starting program: /home/whb/test/test/mycmd
I will beginBreakpoint 1, main () at mycmd.c:24
24 int n = Sum(start, end);
(gdb) s
Sum (s=32767, e=-7136) at mycmd.c:9
9 {
(gdb) n
10 int result = 0;
(gdb) n
11 for(int i = s; i <= e; i++)
(gdb)
13 result += i;
(gdb)
11 for(int i = s; i <= e; i++)
(gdb)
13 result += i;
(gdb) until 14
Sum (s=1, e=100) at mycmd.c:16
16 return result*flag;
(gdb) p result
$1 = 5050
(gdb) p flag
$2 = 0
(gdb) set var flag=1 # 更改flag的值，确认是否是它的原因
(gdb) p flag
$3 = 1
(gdb) n
17 }
(gdb) n
main () at mycmd.c:25
25 printf("running done, result is: [%d-%d]=%d\n", start, end,
n);
(gdb) n
running done, result is: [1-100]=5050 # 是它的原因
26 return 0;4、条件断点
添加条件断点
(gdb) l main
11
12 return result;
13 }
14
15 int main()
16 {
17 int start = 1;
18 int end = 100;
19 printf("I will begin\n");
20 int n = Sum(start, end);
(gdb) b 20
Breakpoint 1 at 0x11c3: file mycmd.c, line 20.
(gdb) r
Starting program: /home/whb/test/test/mycmd
I will beginBreakpoint 1, main () at mycmd.c:20
20 int n = Sum(start, end);
(gdb) s
Sum (s=32767, e=-7136) at mycmd.c:5
5 {
(gdb) n
6 int result = 0;
(gdb) n
7 for(int i = s; i <= e; i++)
(gdb) n
9 result += i;
(gdb) display i
1: i = 1
(gdb) n
7 for(int i = s; i <= e; i++)
1: i = 1
(gdb) n
9 result += i;
1: i = 2
(gdb) n
7 for(int i = s; i <= e; i++)
1: i = 2
(gdb) n
9 result += i;
1: i = 3
(gdb)
7 for(int i = s; i <= e; i++)
1: i = 3
(gdb) info b
Num Type Disp Enb Address What
1 breakpoint keep y 0x00005555555551c3 in main at mycmd.c:20breakpoint already hit 1 time
(gdb) b 9 if i == 30 # 9是⾏号，表⽰新增断点的位置
Breakpoint 2 at 0x555555555186: file mycmd.c, line 9.
(gdb) info b
Num Type Disp Enb Address What
1 breakpoint keep y 0x00005555555551c3 in main at mycmd.c:20breakpoint already hit 1 time
2 breakpoint keep y 0x0000555555555186 in Sum at mycmd.c:9stop only if i == 30
(gdb) finish
Run till exit from #0 Sum (s=1, e=100) at mycmd.c:7Breakpoint 2, Sum (s=1, e=100) at mycmd.c:9
9 result += i;
1: i = 30
(gdb) finish
Run till exit from #0 Sum (s=1, e=100) at mycmd.c:9
0x00005555555551d2 in main () at mycmd.c:20
20 int n = Sum(start, end);
Value returned is $1 = 5050给已经存在的端点新增条件
(gdb) l main
11
12 return result;
13 }
14
15 int main()
16 {
17 int start = 1;
18 int end = 100;
19 printf("I will begin\n");
20 int n = Sum(start, end);
(gdb) b 20
Breakpoint 1 at 0x11c3: file mycmd.c, line 20.
(gdb) r
Starting program: /home/whb/test/test/mycmd
I will beginBreakpoint 1, main () at mycmd.c:20
20 int n = Sum(start, end);
(gdb) s
Sum (s=32767, e=-7136) at mycmd.c:5
5 {
(gdb) n
6 int result = 0;
(gdb) n
7 for(int i = s; i <= e; i++)
(gdb) n
9 result += i;
(gdb)
7 for(int i = s; i <= e; i++)
(gdb)
9 result += i;
(gdb)
7 for(int i = s; i <= e; i++)
(gdb)
9 result += i;
(gdb)
7 for(int i = s; i <= e; i++)
(gdb) b 9 # 我们在第9⾏新增⼀个断点，⽤来开始测试
Breakpoint 2 at 0x555555555186: file mycmd.c, line 9.
(gdb) info b
Num Type Disp Enb Address What
1 breakpoint keep y 0x00005555555551c3 in main at mycmd.c:20breakpoint already hit 1 time
2 breakpoint keep y 0x0000555555555186 in Sum at mycmd.c:9
(gdb) nBreakpoint 2, Sum (s=1, e=100) at mycmd.c:9
9 result += i;
(gdb) n
7 for(int i = s; i <= e; i++)
(gdb) nBreakpoint 2, Sum (s=1, e=100) at mycmd.c:9
9 result += i;
(gdb) condition 2 i==30 #给2号断点，新增条件i==30
(gdb) info b
Num Type Disp Enb Address What
1 breakpoint keep y 0x00005555555551c3 in main at mycmd.c:20breakpoint already hit 1 time
2 breakpoint keep y 0x0000555555555186 in Sum at mycmd.c:9stop only if i==30breakpoint already hit 2 times
(gdb) n
7 for(int i = s; i <= e; i++)
(gdb) n
9 result += i;
(gdb) c
Continuing.
Breakpoint 2, Sum (s=1, e=100) at mycmd.c:9
9 result += i;
(gdb) p i
$1 = 30
(gdb) p result
$2 = 435
📌 注意：
- 条件断点添加常见两种方式：1. 新增 2. 给已有断点追加
- 注意两者的语法有区别，不要写错了。
- 新增： b 行号/文件名:行号/函数名 if i == 30(条件)
- 给已有断点追加：condition 2 i==30， 其中2是已有断点编号，没有if